PNEUMATIC LOCKS

120 SERIES PNEUMATIC LOCK
· Pin tumblers.
· Designed for swinging doors.
· Suited for virtually any medium or maximum-security application including cell doors, sallyport or egress doors, and corridor or entrance doors.
· Jamb-mounted and are designed to be controlled by an electronic controls system and provide monitoring of lock status for optimum protection and flexibility.
· Unlocks when the pneumatic solenoid is energized by a momentary-contact switch, once unlocked the latchbolt is held mechanically retracted until the door is opened, it then extends automatically.
· Available in other variations - without latchback, knob release, and key holdback.
· Features an indication switch that monitors the latch bolt extension and its deadlocked condition.
· Pneumatic solenoid voltage of 24VDC.
· Stainless steel construction for superior strength and durability.
· Standard lock size - all models use the same size case, cover and mounting holes.
· External two-piece connector, air coupler and mounting holes.
· Standard lock mounts behind frame and does not require a faceplate.
· 1" throw latchbolt for greater security.
· Mechanical unlocking by keys in the event of power failure.
· Furnished with four Torx tamper-resistant screws.
50 SERIES PNEUMATIC LOCK
· Lever tumblers.
· Designed for swinging doors.
· Provide maximum security for heavily-used cell, corridor or entrance doors.
· Convenience of slam-locking with remote unlocking.
· Designed for jamb-mounted installation.
· When connected to a momentary-contact switch, the latchbolt retracts when the pneumatic solenoid is energized, once retracted it is held mechanically retracted until the door is opened, it then extends automatically.
· Available in no-notch variations.
· Pneumatic solenoid voltage of 24VDC.
· Two-piece plug connector simplifies wiring.
· Instant solenoid operation.
· External air coupler.
· Automatic deadlocking.
· Full ¾" bolt throw projects to ¼" when retracted.
· Mechanical unlocking by key in the event of power failure.
· Choice of 5 or 6 lever tumbler models.
· Indication switch monitors the extension of the latch bolt.
· Rugged construction of 7-gauge steel.
· Deadlock actuator.
NARROW-JAMB PNEUMATIC LOCK
· Pin tumblers.
· Designed for swinging doors.
· Suited for minimum or medium-security swinging cell, corridor or administration areas of institutions with 2" wide hollow metal jamb construction.
· Remote switch is used to control the lock pneumatically, or it may be operated mechanically by builders' hardware key cylinder.
· Offers the convenience of remote, electric unlocking or locking, and automatic deadlocking when the door is closed.
· Instant solenoid actuation.
· Compact size - designed for hollow metal frames with standard 2" face.
· Two-piece, twelve-pin plug connector simplifies wiring and allows pre-wiring of the lock opening.
· Heavy-duty lock mechanism.
· Stainless steel strike.
· Mechanical latchback holds latchbolt retracted until door opens.
· Mechanical unlocking by key in the event of power failure.
· Stainless steel latchbolt with 3'4" throw and hardened steel inserts to prevent sawing.
· Indication switch to monitor the positions of the deadlock actuator.
MECHANICAL LOCKS
SERIES 110 MORTISE MECHANICAL LOCKS
· Pin tumbler, mechanical locks for swinging doors.
· Suited to minimum to medium security applications in detention facilities.
· Good in areas such as offices, patient rooms or any area where abuse is unlikely.
· For swinging wood or hollow metal doors that are 1-3/4" thick or greater.
· Deadbolt operation - locks and unlocks by key.
· Latchbolt snap-locking when door is closed.
· Maxi-Mogul key cylinder.
· Heavy-duty knobs of solid brass construction.
· Armored front.
· Durable cast brass alloy case.
· Working parts are corrosion resistant.
· Large, solid brass latch and deadbolt.
SERIES 30D MECHANICAL LOCKS
· Lever tumbler, mechanical locks for sliding doors.
· Recommended for use on sliding cell, corridor, or entrance doors. Ideal for doors left open or unattended at times.
· Mechanical operation - deadlocks and unlocks by key, which is removable in both locked and unlocked condition.
· Durable case made of malleable iron with 3/16" thick steel cover.
· Working parts are corrosion resistant.
· Heavy-duty lever tumblers - 5 spring-temper brass tumblers activated by heavy phosphor-bronze springs.
· Large, solid hookbelt of ½" thick galvanized steel.
SERIES 60K MECHANICAL LOCKS
· Lever tumbler mechanical locks for swinging doors.
· Features a knob set, which is active when the lock is not deadbolted.
· Ideal for use in administrative or infirmary areas where staff personnel require the convenience of knob operation combined with slam-locking and the security of a deadbolt.
· Mechanical operation - locks and unlocks by key, which is removable in the deadlocked and latch position.
· Automatic snap-locking when door is closed.
· Durable case of malleable iron with 3/8" thick cold drawn steel cover.
· Working parts are corrosion resistant.
· 5 spring-temper brass tumblers activated by heavy phosphor-bronze springs.
· Large solid latchbolt of galvanized steel.
· Bolt projection may be varied to suit conditions.
· Mounting on hollow metal, grille or plate.
80 SERIES MECHANICAL DEADLOCKS
· Lever tumbler mechanical locks.
· Designed for swinging doors.
· Designed for use on cell doors, corridor doors, dormitory doors and dayrooms.
· Also suited for storage rooms, or large control cabinets.
· Mechanical operation - locks and unlocks by keys.
· Durable case - drop-forged case with 3/8" thick cold steel cover.
· Working parts are corrosion resistant.
· Heavy duty lever tumblers or spring-temper brass, activated by heavy phosphor bronze springs.
· Series 80 uses 5 tumblers, while series 80-6 uses 6.
· Large, solid deadbolt of galvanized steel with three hardened steel roller pins.
· ¾" Bolt Throw.
· Investment-cast key cylinder.
· Optional features include higher security in the form of the 6 tumbler model for greater pick resistance; bolt projection may be varied to suit conditions; case and cover can be galvanized for corrosion resistance; can be mounted on hollow metal, plate or grill mounting.
3800 CREMONE BOLTS
· Lever tumbler, mechanical deadlocks for single or paired swinging doors.
· Provides 3-point locking for the active or single door, and 5-point locking for paired doors.
· Designed for maximum security on corridor, entrance, or armory doors which may be subject to mass attack.
· Please specify if for use on hollow metal or grille doors.
· Mechanical operation - active door is operated by a key which deadlocks the deadbolt, head and foot bolts. Inactive door is operated from its own cylinder which deadbolts head and foot bolts.
· Lever handle operation.
· Head and foot bolts are 7/8" diameter steel.
· Case and cover made of durable3/16" channel iron and 7-gauge steel.
· Working parts are corrosion resistant.
· Heavy-duty lever tumblers.
· Large, solid bolt.
ELECTROMECHANICAL LOCKS
120 SERIES ELECTOMECHANICAL DEADLATCH
· Pin tumbler, motor-operated locks for swinging doors.
· Jamb-mounted.
· Designed for use in medium to maximum-security facilities to secure cell doors, sallyports, corridor or entrance doors.
· Motor provides smooth, quiet operation and positive locking.
· Designed to be part of an electrical system with remote operation and monitoring.
· Offers flexibility and safety to institution staff.
· Indoor use only.
· Operation - Unlocks when motor is energized by a momentary-contact switch. Once unlocked, the latchbolt is held open mechanically retracted until door is opened. It then extends automatically.
· Indication switches monitors the latch bolt extension and its deadlocked condition.
· 120 VAC Motor voltage.
· Working parts made of stainless steel for greater strength and durability.
· Standard lock size.
· External two-piece plug connector.
· External mounting holes.
· 1" throw latchbolt.
· Mechanical unlocking by keys in the event of power failure.
· Investment-cast stainless steel strike.
· Fractional HP motor.
SERIES 125 MORTISE ELECTROMECHANICAL DEADLATCHES
· Available in four different models.
· Offers heavy-duty door security for commercial and industrial applications, or medium security for institutional doors.
· Knob-lockout feature allows operation mechanically by key, or electrically by internal solenoid.
· Tamper and corrosion-resistant construction assures long, dependable service.
· Indication switches are also available to customoze operation to specific security needs.
· All electric models offer a choice of fail-safe or non-fail-safe operation as needs dictate.
· Uses Mogul key.
900 SERIES ELECTROMECHANICAL LOCKS
· Ideal for installation in hollow-metal door frames.
· Compact design.
· Applicable to industrial buildings as well as minimum to medium security areas of institutions.
· Two basic styles, deadbolt and deadlatch are offered.
· Latches allow convenient slam-locking.
· Both types can be done with remote, electrical unlocking from a central location.
· Provided with commercially-available builders hardware key cylinders.
· Tamper resistant.
· Tamper resistant design and enhanced durability.
· Indication switches may be specified to adapt them to complete security systems.
· Fail-safe and non-fail-safe operation is available.
51E SERIES ELECTOMECHANICAL DEADLATCH
· Lever tumbler, solenoid-operated locks for swinging doors.
· Designed for door-jamb installation.
· Provide maximum security for heavily used cell, corridor or entrance doors.
· Provide the convenience of slam-locking with remote, electrical unlocking.
· Operation - When connected to a momentary-contact switch, the latchbolt retracts when the solenoid is energized. Once retracted, the latchbolt is held mechanically retracted until door is opened. The latchbolt extends when door is open.
· 120VAC Solenoid voltage.
· Two-piece plug connector simplifies wiring.
· Instant solenoid operation is dependable.
· Automatic deadlocking.
· Mechanical unlocking by key in the event of a power failure.
· Indication switch monitors extension of the latch bolt and the dead locked condition is included.
· Case and cover are made of 7-gauge steel.
· Choice of 5 or 6 lever tumbler models.
· Solid steel latchbolt.
· Deadlock actuator of galvanized steel.
OPERATORS
CELL DOOR OPERATORS
· Offers complete selective electric operation of sliding doors in a line or group from a remote control station.
· Doors are operated by electric motors through a rack and pinion drive mechanism over each door.
· System allows for emergency mechanical unlocking from a control cabinet at the head of the door line.
· Doors are locked at top and bottom in both in both the open and closed positions by means of a concealed vertical lock bar at the rear jamb of each door, and the vertical lock bar is deadlocked at a third locking point inside the horizontal cover box above the door.
· Standard clear door opening widths are from 2'4" to 3'2".
· A remote switch activates a motor, which raises a vertical lock bar and propels the door open or closed.
· Individual lamp indicators on the control panel show locked/unlocked condition.
· Single switch provides group unlocking.
· In the absence of electrical power, doors may be individually unlocked with a manual release tool.
· Door movement is by hand and door will relock in either fully open or closed position.
· In an emergency, all doors in a cell line may be simultaneously unlocked from a mechanical release cabinet at the end of the cell line.
· Doors will not relock in any position while in emergency release mode.
· Standard features include bottom door guide, door hanger, mechanical release cabinet, screwed on removable cover panel, slope-front cover box, and vertical lock bar assembly.
CORRIDOR DOOR OPERATORS
· Designed for locking, unlocking and propelling sliding doors in safety vestibules, in dayrooms and in high-traffic conditions.
· Several versions available.
· Utilizes an electric motor to operate the door through a rack and pinion drive mechanism.
· Doors are locked at top and bottom in both the open and closed positions by means of a concealed vertical lock bar at the rear jamb of the door.
· Vertical lock bar is deadlocked at a third locking point inside the horizontal cover box above the door.
· Standard clear door opening widths available are 3' to 4'6".
· A remote switch activates a motor, which raises a vertical lock bar and propels the door open or closed.
· Manual unlocking is provided for each device.
· Standard features include bottom door guide, door hanger, local mechanical release at cover box, screwed on removable cover panel, slope-front cover box, and vertical lock bar assembly.
VEHICLE GATE OPERATORS
· Designed for use on vehicular entrances in a perimeter security fence.
· Remote switch activates a motor which raises a vertical lock bar and propels the door open or closed.
· In an electrical emergency, the door is manually unlocked and propelled open by use of a hand crank located in the vertical locking pilaster.
· Standard features include 208 VAC three-phase motor, easy-to-reach mechanical operation and maintenance access, and three-point locking.
· Optional features are remote control panel and 208 VAC single-phase motor.
MANUAL SLIDERS
· Track and hanger sets are overhead supporting devices for manually sliding doors that range in width from 2' to 3'6" up to a maximum weight of 350 lbs.
· May be used for cell or corridor doors on grille, masonry or plate wall construction.
· Three standard housing sizes suit most door sizes and applications.
· Self contained design.
· Heavy housing construction.
· Sloped-top housing.
· Corrosion-resistant construction for working parts.
· Tamper resistant.
· Adjustable door rollers.
· Galvanized steel door rollers with sealed, anti-friction bearings make for smooth operation.
· Adjustable doorstop.
· Non-handed, so no preference towards right or left-handed users.
· Finish is USP primed for painting.
· Rubber bumper is attached to doorstop to reduce noise.
· Optional features include an indication switch, door starter, custom sizing and continuous housing.
PRISON LOCKS