SWS Detention
Doors - Hollow Metal
- Frame is fabricated of pressed steel sections with integral doorstops and is fully grouted after installation.
- It is prepared for the appropriate security hardware including conduit routed internally, and junction boxes.
- Can be made with access openings with cover plates as necessary for wiring installations.
- The door can be a typical detention security type, prepared for security hinges, electrical or mechanical detention security lock, and position switch indicator.
- Door can include conduit routed internally to suit electrically operated hardware when applicable.
- Inmate has no access to the outside of the enclosure because there are no grille openings except where desired in the design.
- No heat treatment is required for the steel used in the detention hollow metal construction.
- There are no openings through which an inmate can reach and harm passers-by. The only openings are staff controlled.
- Reduction of visibility, which can occur in a hollow metal assembly, is offset by the proper placement of security glass, perforated plate, wire mesh screen or grille to provide adequate visibility for the purpose of staff observation.
- Internally stiffened, insulation filled door construction minimizes the amount of noise to a dull, thudding noise if inmate chooses to beat and kick the cell front. Also the full grouted jambs and mullions are highly effective for noise control.
- Hollow metal construction provides a great deal of freedom in the design of cell fronts as well as security window walls, guard enclosures and control stations.
- Affordable.
Your Shopping Cart
Your shopping cart is currently empty!
